Royal Float Pod
$16,000.00
The Royal Spa® Float Pod is designed for use in residential and commercial settings. Whether you’re looking to own a personal float tank or add equipment to and existing spa, our Float Pods are the perfect fit!
Our float tanks have been engineered to provide the optimal experience for the floater and the business owner. These tanks are designed so you can spend time on taking care of customers and growing your business instead of fixing and maintaining the equipment. The tanks are made at our manufacturing facility in Indianapolis, Indiana where we’ve been in business for almost 40 years, with our first float tank produced in early 2012.
Description
Why Royal Spa Float Pods Lead The Industry
- low noise
- superior air quality
- effective and efficient purification system
- easy to clean
- low-cost maintenance
- energy efficient
- durable materials
- Internal/external equipment options
Float Pod Includes
Includes 24 gmp, UV, Ozonator, music system, blue light, in-line heater, under tank heaters and maintenance kit.
“Thanks to Royal Spa we’ve served over 10,000 floats with ZERO down time due to equipment malfunction. The tanks require minimal care, allowing us to spend more time and effort on creating an exceptional customer experience and building a successful business.” ~Aaron Douglas, A Place To Float
Additional information
Condition | New |
---|---|
Dimensions | 103.5 x 70.5 x 54 in. |
Water capacity | 180 gallons |
Dry weight | 700 lbs |
Filled weight | 2600 lbs |
Purification system | UV unit, Ozone unit |
Electrical requirements | 220V/20AMP/3-wire with ground GFI protection required Hubble L14-30 receptacle or equivalent |
Additional considerations | Float tub must be placed on a hard, level surface. All work must be done to local codes and ordinances. Mechanicals may be placed in different location — consult Royal Spa representative. Proper in-room HVAC must be installed to accommodate humidity. |
Features
Pump and Circulation
Our energy efficient pump is just the right size to turn over the solution without creating other problems. An unnecessarily large pump forces too much salt in the air. This is especially bad for HVAC systems, electronic components, and computers. Worst of all it drives away customers because of the negative impact on air quality.
The pump is very quiet. You can have the pump running in one room and someone floating in the room beside it at the same time without disturbing their float.
Our pump will not overheat the solution. A pump motor that is too big moves the solution to quickly, creating unnecessary friction. This causes the solution to overheat. It can take hours to get the temperature back down to an appropriate level.
Purification and Filtration
Save time and money with our approach to filtration. We use a simple and inexpensive filter available at any pool supply store in the U.S.
Placement of the filter inside the tank helps prevent spillage of the solution on the surrounding floor. It also protects the pump motor and electrical components.
Trust us. You’ll come to greatly appreciate that design feature.
Tanks are equipped with dual skimmers. This insures the surface integrity of the solution. The skimmer basket is located inside the tank, which is a requirement of many local municipalities.
Ozone and UV purification insures bacteria and viruses are eliminated from the solution, tank surfaces, and air.
Control System
We offer a computer controlled system for businesses who want to control multiple tanks. This allows central control of the tanks for starting and stopping the circulation process, lighting, and music.
Our clinical tanks have simpler components designed for in-room controls.
Heating System
A 3000 watt flow-through titanium heating system creates approximately 10,000 BTU’s. This is needed to insure the salt can melt in a reasonable amount of time.
Under the tank is a waterbed style heating system which operates during a float. These two 500 BTU elements help replace heat that is loss while a person is in the tank.
Ventilation
Convective currents inside the pod create fresh air for the floater while the lid is closed.
Lighting
The tank has a single light window with 3 lighting options: 24 LEDs, 9 LEDs, or a single blue LED, which is what we recommend. Multi-colored options are available.
Materials
Unlike our competitors who use a polyester based resin we use a specialized resin formulated for chemical storage tanks. Magnesium sulfate solution is particularly destructive. A regular polyester resin will blister over time from contact with the solution.
Audio
All of our models have a 3.5mm input jack. Bluetooth is optional. (The pairing process can be difficult for users in a multiple tank setting). Commercial models also have a 2-way intercom system.
Upgrades
- Mechanical equipment configured for external location – No Extra Charge
- Fiberglass case for external equipment – $650 (approx. 40 x 24 x 21 in)
- Over-sized pump used by competitors – $350
Warranty
5-year structural warranty
5-year shell warranty
1-year surface warranty
Documentation
Owner’s Manual and Product Documentation are available on our download page.