Royal Float Room

Price range: $10,699.00 through $10,999.00

Open Float Rooms are a valuable alternative to coffin-style pods that turn first-timers away before they ever experience a session. An open architecture lets clients see the room, sit up mid-float, and ease in at their own pace — removing the single biggest barrier to repeat bookings. The XL can accommodate up to two guests over 6 feet tall. UV and ozone sanitation between sessions keeps water pristine without heavy chemical loads, and every surface is built from chemical-resistant resin rated for continuous Epsom salt exposure.

The Float Tank That Doesn’t Scare Your Clients Away

Enclosed pods look impressive in photos, but they cost you bookings. Roughly 30 to 40 percent of first-time prospects hesitate or cancel once they realize the session happens inside a sealed capsule. The Float Room eliminates that objection entirely. Clients step into an open room-style tank where they can see the ceiling, sit up whenever they want, and never feel trapped. That single design choice turns skeptics into regulars and keeps your booking calendar full instead of peppered with last-minute cancellations.

Two Sizes, Two Revenue Strategies

The Standard Float Room fits comfortably in a single treatment suite and handles the vast majority of adult clients. It draws less water, heats faster between sessions, and keeps your per-float operating cost as low as possible — ideal for high-volume solo bookings where turnover speed matters. The XL opens up a second revenue channel entirely. With room for two people side by side, you can offer couple’s float sessions at premium rates while also accommodating taller clients up to six foot six who simply will not fit in a standard-size tank. Most operators start with a Standard to prove demand, then add an XL once couple’s sessions start showing up in their booking requests.

Built for the Way Commercial Float Centers Actually Operate

A residential hot tub runs a few hours a week. A commercial float tank runs back-to-back sessions ten or more hours a day, six or seven days a week, in water saturated with over eight hundred pounds of dissolved Epsom salt. The Float Room is engineered specifically for that reality. Every surface uses chemical-resistant resin that will not degrade, pit, or discolor under continuous salt exposure. The filtration and UV-ozone sanitation system turns the water over between sessions without requiring staff to manually dose chemicals, and the integrated heating system maintains solution temperature with minimal energy draw during idle periods. The five-year warranty covers the shell, plumbing, and equipment under commercial-use conditions — not just the residential fine print that voids coverage the moment you charge a customer for a session.

Additional information

Weight 500 lbs
Dimensions 103.5 × 70.5 × 24 in
Water capacity

180 gallons

Electrical requirements

220V/20AMP/3-wire with ground GFI protection required Hubble L14-30 receptacle or equivalent

Dry weight

700 lbs

Filled weight

2600 lbs

Purification system

UV + Ozone

Additional considerations

Float tub must be placed on a hard, level surface. All work must be done to local codes and ordinances. Mechanicals may be placed in different location — consult Royal Spa representative. Proper in-room HVAC must be installed to accommodate humidity.

Build

Standard, XL

Features

Pump and Circulation

Our energy efficient pump is just the right size to turn over the solution without creating other problems. An unnecessarily large pump forces too much salt in the air. This is especially bad for HVAC systems, electronic components, and computers. Worst of all it drives away customers because of the negative impact on air quality.

The pump is very quiet. You can have the pump running in one room and someone floating in the room beside it at the same time without disturbing their float.

Our pump will not overheat the solution. A pump motor that is too big moves the solution to quickly, creating unnecessary friction. This causes the solution to overheat. It can take hours to get the temperature back down to an appropriate level.

Purification and Filtration

Save time and money with our approach to filtration. We use a simple and inexpensive filter available at any pool supply store in the U.S.

Placement of the filter inside the tank helps prevent spillage of the solution on the surrounding floor. It also protects the pump motor and electrical components.

Trust us. You’ll come to greatly appreciate that design feature.

Tanks are equipped with dual skimmers. This insures the surface integrity of the solution. The skimmer basket is located inside the tank, which is a requirement of many local municipalities.

Ozone and UV purification insures bacteria and viruses are eliminated from the solution, tank surfaces, and air.

Control System

We offer a computer controlled system for businesses who want to control multiple tanks. This allows central control of the tanks for starting and stopping the circulation process, lighting, and music.

Heating System

A 3000-watt flow-through titanium heating system creates approximately 10,000 BTUs. This is needed to ensure the salt can melt in a reasonable amount of time.

Under the tank is a waterbed style heating system which operates during a float. These two 500 BTU elements help replace heat that is loss while a person is in the tank.

Ventilation

Convective currents inside the pod create fresh air for the floater while the lid is closed.

Lighting

The tank has a single light window with 3 lighting options: 24 LEDs, 9 LEDs, or a single blue LED, which is what we recommend. Multi-colored options are available.

Materials

Unlike our competitors who use a polyester based resin we use a specialized resin formulated for chemical storage tanks. Magnesium sulfate solution is particularly destructive. A regular polyester resin will blister over time from contact with the solution.

Audio

All of our models have a 3.5mm input jack. Bluetooth is optional. (The pairing process can be difficult for users in a multiple tank setting). Commercial models also have a 2-way intercom system.

Upgrades

Optional Upgrades:

  • Mechanical equipment configured for external location – No Extra Charge
  • Fiberglass case for external equipment – $650 (approx. 40 x 24 x 21 in)
  • Over-sized pump used by competitors – $350

Warranty

5-year structural warranty
5-year shell warranty
1-year surface warranty

Documentation

Find the Float Tank Owner’s Manual and Product Documentation Here.

*Royal Spa products are designed to promote relaxation and general wellness and are not medical devices. They are not intended to diagnose, treat, cure, or prevent any disease or medical condition. Always consult a qualified healthcare provider before beginning any new wellness, hydrotherapy, or cold/heat exposure routine.